As an important transportation infrastructure, the durability of bridges directly affects traffic safety and operational efficiency. As an effective bridge protection measure, Bridge Deck Overlays can significantly extend the service life of bridges. As a high-performance microfine material, シリカフューム plays an increasingly important role in Bridge Deck Overlays.

The role of silica fume in Bridge Deck Overlays

• Improved durability and resistance to chloride penetration: The addition of silica fume to concrete mixtures results in a denser, less permeable concrete matrix, which enhances resistance to chloride penetration and reduces the risk of corrosion of reinforcing steel. This is especially important for bridge deck coverings exposed to de-icing salts and other hazardous substances.
• Higher compressive and flexural strength: シリカフュームコンクリート has significantly higher compressive and flexural strength than conventional concrete. The increased strength extends the service life of the bridge deck and increases its load-bearing capacity.
• Reduced permeability and improved abrasion resistance: The dense microstructure of silica fume concrete reduces permeability to water and corrosives and increases resistance to freeze-thaw cycles, spalling and abrasion. This is highly beneficial for bridge deck overlays subjected to heavy traffic loads and environmental exposure.
• 接着強度の向上: The addition of silica fume to concrete mixtures improves the bond strength between the overlay and the existing concrete substrate, ensuring better composite action and reducing the risk of delamination or debonding.
• Improves workability and pumpability : The addition of silica fume improves the workability and pumpability of fresh concrete, which facilitates the placement and completion of bridge deck overlays.

Application of silica fume in bridges

Bridge Deck Overlays

• Improve Wear Resistance: Silica fume can significantly increase the surface hardness of concrete, enhancing its wear resistance and extending the service life of the bridge deck.
• Improve skid resistance: Silica fume can optimize the microstructure of concrete and improve its surface roughness, thus improving the skid resistance of bridge decks and enhancing traffic safety.
• Enhance impermeability: Silica fills the pores of concrete, reduces its permeability, effectively resists chlorine ion erosion, and protects steel reinforcement from corrosion.

Bridge piers

• Strength Improvement: Silica fume can increase the compressive and tensile strength of concrete, and enhance the bearing capacity of bridge piers.
• Improve durability: Silica fume can improve the frost resistance and carbonation resistance of concrete, and prolong the service life of bridge piers.

Precast bridge components.

• Improve strength and durability: Silica fume can improve the strength and durability of precast structures and reduce maintenance costs.
• Shorten construction period: The high early strength of シリカフュームコンクリート can shorten the maintenance time of precast structures and speed up the construction progress.

Bridge Repair and Reinforcement.

• Improvement of concrete bonding strength: Silica fume can improve the bonding strength between the repair material and the original concrete to ensure the repair effect.
• Improvement of concrete durability: Silica fume can improve the durability of repaired concrete and prolong the repair effect.

Case of silica fume application in bridges

場合 1: A sea-crossing bridge

Problem: The bridge deck of a cross-sea bridge has been exposed to the harsh marine environment for a long time, facing problems such as seawater erosion and sand abrasion, resulting in cracking and spalling of the bridge deck concrete, which seriously affects the service life of the bridge.

解決: Silica fume was added into the bridge deck concrete to prepare high-performance concrete. The addition of silica fume significantly improves the densification, impermeability and abrasion resistance of the concrete, effectively resisting the erosion of seawater and the abrasion of wind and sand.

Effect: Through regular testing of the bridge deck, it was found that the surface of the concrete of the bridge deck mixed with silica fume was smooth, with no obvious cracks and spalling phenomenon, and the service life was extended by more than 30%.

場合 2: A viaduct

Problem: Viaduct piers and platforms for a long time to withstand repeated action of vehicle loads and temperature changes, easy to produce cracks, affecting structural safety.

解決: Mix silica fume in the concrete of bridge piers and platforms to improve the crack resistance and seepage resistance of concrete. 同時に, the concrete is mixed with steel fibers to further enhance the crack resistance of the concrete.

Effect: Through long-term monitoring, it was found that the crack width of the bridge abutment platform concrete mixed with silica fume and steel fibers was significantly reduced, and the number of cracks was reduced by more than 50%, which effectively prolonged the service life of the bridge.

場合 3: a highway bridge

Problem: Highway bridge deck pavement is often crushed by heavy vehicles, easy to produce local damage, affecting traffic safety.

解決: Silica fume is mixed into the bridge deck concrete to improve the wear resistance and impact resistance of the concrete.

Effect: Through the abrasion test on the bridge deck pavement layer, it is found that the abrasion resistance of the concrete mixed with silica fume is increased by more than 30%, which can better resist the crushing of vehicles and prolong the service life of the bridge deck.

要約する

Through the above cases, it can be seen that the application of silica fume in bridge engineering has significant advantages, which can effectively improve the strength, 耐久性, 不浸透性, wear resistance and other properties of bridge concrete, prolong the service life of the bridge, and reduce the maintenance cost.

The application of silica fume in bridge engineering has a broad prospect, with the continuous progress of technology and people’s demand for durability of infrastructure continues to improve, silica fume will be widely used in more bridge projects.

HSA, as a leading company in the silica fume industry, will continue to be committed to providing customers with high-quality products and services and contributing to bridge construction.

• Eメール: sales@superior-abrasives.com
• ワッツアップ: +86-18638638803